Features & Benefits
- Hole pattern: according to DIN 24 340 and ISO 4401, PN max. 315bar
- Simple electrical programming and remote control
- Variable transfer pattern
Technical Information
Medium: HLP, oil purity class according to ISO 4406: 17/15/12, other process liquids upon request
Operation: poppet valve, directly controlled
Actuation method: proportional magnet
Mounting type: flange
Line connection: sub plate
Installation: on base plate
Nominal size:
- 6 for type: D B C 6 UP G...002 2 O O
- 10 for type: D B C 10 UP G...301 3 O O
Operating pressure:
Operating pressure range *1) pe: 315bar
adjusted pressure range PEv: pvmin: see characteristics
*2) pvmax:
pressure rating 50: up to 50
pressure rating 99: up to 170
pressure rating 99: up to 315
Installation position: preferably hanging magnet, on start-up vent valve via screw on magnet operating system
Viscosity: 12...500mm/s
Flow direction: form P according to T
Setting time for adjusted pressure range *4)
from pvmin. to 0.9pvmax.[ms]: = 35
Hysteresis 3) [%IN]:
- Area I <7.5 /
- Area II < 3.5 at Q = 0.5 (l/min)
- Area I <3 /
- Area II < 3 at Q = 20 (l/min)
Repetition accuracy *3):
- pressure rating 50: < +/-1 bar
- pressure rating 99: < +/->2 bar (at Q = const.)
- pressure rating 90: < +/-3 bar
Response sensitivity *3) IN: <1%
Fluid/Ambient temperature: 0...+70degC
Ambient temperature: -20...+50degC
Circuit diagram: according to DIN 24340 and ISO 6264
Materials:
- Housing: cast iron, thick-coat passivated
- Piston slide valve: hardened steel
- seal: NBR
- plate: steel
*1) if the valve is used as an upstream control valve for larger pressure valves, then vaporisation measures must be taken on the complete system
*2) smaller pv max. can be set at the amplifier
*3) if noisy: frequency 50Hz, amplitude 15/15% INM
*4) at size 6 15l/min, DC 05 (laboratory setup)